Linux Disk Encrpytion

cryptsetup -v --type luks2 luksFormat /dev/sd?? 

cryptsetup luksOpen /dev/sd?? sd??_crypt 

If you have a encrpyted root partition, it usually requires access to the console to enter the passsphrase.

Even if you have the root partition unencrypted and have you sensitive data on a different encrypted partition, that you manually mount after SSH is available. You still have to deal with starting services after said manual mount.

There are a number of remote unlocking tools (luksrku, mandos, tang/clevis), which attempt to solve this problem, by having a service running a trusted network to provide the decryption key. While this may be suitable for larger environments, I needed something simplier, suited for a handful of machines.

I decided to use dropbear to run an SSH daemon in the initrd, then being able to SSH in and unlock all the devices in the initrd, before starting the root pivot.

This then allows the usual systemd init system to start services. Without needing to implement any custom service starting.

The dropbear SSH daemon can be installed in the initrd by:

apt-get install dropbear-initramfs

Password authentication is disabled, therefore you need to add your authorizedkeys to /etc/dropbear/initramfs/authorizedkeys

Dropbear options can be added to DROPBEAR_OPTIONS in /etc/dropbear/initramfs/dropbear.conf. See man dropbear(8) for more details.

Configuring networking in the initrd, is the same as documented for configuring NFS root booting. Upstream docs can be found at https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt , under the ip parameter.

This matches the IP= option placed in /etc/initramfs-tools/initramfs.conf. e.g.

IP=10.42.2.100::10.42.2.250:255.255.255.0:frank:eno1

Networking persists to the OS booting, which is good if your configuration is the same.

In my case, the IP in the full OS should be on a bridg ise device (br0), not eno1 as it is in the initrd. The simplest solution is to remove the networking configuration as the initrd pivots and let netplan bring up the new configuration as the OS boots.

To remove the initrd networking, add the following script as /etc/initramfs-tools/scripts/init-bottom/remove-networking.sh:

#!/bin/sh

DEV=eno1

rm -f /run/netplan/${DEV}.yaml
ip -f inet address flush dev ${DEV}

(change DEV to match your network interface)

The cryptsetup-initramfs package, provides a convience wrapper for unlocking devices called cryptroot-unlock, this is the script you would run via SSH to unlock all the devices and continue the boot.

This script will ask for the passphrase for every device. In my case, I have many devices, with the same passphrase. The following modifcation will try the previouisly used passphrase for the next device, any only prompt for a new passphrase if it fails to unlock:

--- cryptroot-unlock    2022-08-04 11:24:48.000000000 +0100
+++ cryptroot-unlock-custom     2023-03-06 13:20:54.361482388 +0000
@@ -180,6 +180,8 @@
        # interactive mode on a TTY: keep trying until all configured devices have
        # been unlocked or the maximum number of tries exceeded
        UNLOCK_ALL=y
+       echo "Unlocking $(count_locked_devices) devices..."
+       read -rs -p "Please unlock disks:"; echo
        while :; do
                # note: if the script is not killed before pivot_root it should
                # exit on its own once $TIMEOUT is reached
@@ -187,9 +189,11 @@
                        usleep 100000
                        continue
                fi
-               read -rs -p "Please unlock disk $CRYPTTAB_NAME: "; echo
                printf '%s' "$REPLY" >"$PASSFIFO"
-               wait_for_answer || true
+               wait_for_answer
+               if [[ $? -eq 1 ]]; then
+                       read -rs -p "Retry password for $CRYPTTAB_NAME: "; echo
+               fi
        done
 else
        # non-interactive mode: slurp the passphrase from stdin and exit

Download the full modified version heree: cryptroot-unlock-custom.gz. Place this in /usr/share/cryptsetup/initramfs/bin, either overwriting cryptroot-unlock or adding it a new file as cryptroot-unlock-custom. If you add a new file, you need to make sure it gets added to the initrd by adding the following to /usr/share/initramfs-tools/hooks/cryptroot-unlock :

if [ ! -f "$DESTDIR/bin/cryptroot-unlock-custom" ] &&
        ! copy_file script /usr/share/cryptsetup/initramfs/bin/cryptroot-unlock-custom /bin/cryptroot-unlock-custom; then
    echo "ERROR: Couldn't copy /bin/cryptroot-unlock-custom" >&2
    exit 1
fi

Make sure all of your encrypted devices are in /etc/crypttab. By default, the initrd unlocking process only unlocks the devices to mount the root partition. This then causes systemd to prompt for the passphrase on the console when booting the OS, which defeats our aim of remote unlocking. This can be solved by adding the initramfs option to every entry in the crypttab to force them to be unlocked during our initrd remote unlocking process.

For example, my /etc/crypttab might look like this:

<target name> <source device>         <key file>      <options>
sda3_crypt      /dev/sda3       none    initramfs
sdb3_crypt      /dev/sdb3       none    initramfs
sdc1_crypt      /dev/sdc1       none    initramfs

Don't forget to regenerate your initrd with:

update-initramfs -u

Since the SSH hostkeys will be different in the initrd from the full OS, your client could easily think MITM attacks are occuring. You can avoid this by having a seperate SSH config entry for SSHing in to the initrd, e.g.:

Host frank-init
    Hostname 10.42.2.100
    User root
    StrictHostKeyChecking no
    UserKnownHostsFile /dev/null

Upon rebooting, you should be able to SSH to the initrd and run cryptroot-unlock, after entering the correct passphrase(s), it will auto close the connection and continue the boot process.